FYTRONIX ELECTROSPINNING SYSTEM
FYTRONIX ELECTROSPINNING SYSTEM includes
The electrospinning process uses high voltage to create an electric field between a droplet of polymer solution at the tip of a needle and a collector plate).
The ES-7000 is a complete electrospinning production system.
You can prepare the following materials
- 1. Nanofiber
- 2. Nano thin film
- 3. Thin film applications
- 4. Thin films for diode, photosensor, solar cells, transistor
HIGH VOLTAGE POWER SUPPLY
DC high voltage power supply has an output voltage (built-in over-current protection and short-circuit protection)
The output voltage can be adjusted. There are various models available, 15 kV, 30 kV, 40 kV, 60 kV.
Input is AC100~240V and
The needles can be changed easily, many choices for diameter and length as follows,
THE CAMERA is at the heart of Electro-Hydrodynamics atomization. In order to get a steady coaxial/simple electrospinning/electrospraying process, Taylor cone steadiness is required. CAMERA visualization is key for checking time-real he performance of the process. Includes: Analog CCD Camera, Lens & Extensor, Camera Support, LED Illumination and VGA output to connect to most of commercial screens.
LED Illumination is equipped with all the security measures, ensuring a safe operation for the user.
Rotating collector of electrospinning is used for collecting aligned nanofiber sheet. This is the simplest and effective method to make aligned nanofibers. By using different length/ diameter ratio, with different rotating speed, an even fiber sheet or aligned fibers can be made.
High aligned nanofiber collector: normally, linear speed is bigger, the fiber alignment will be better. Even though disk collector can make best aligned nanofibers, its collecting area it too limited. In order to get larger fiber sheet with good alignment, FYTRONIX designs the following collector with short length and big diameter.
Some polymers can't be dissloved at room temp., or has high viscosity, which is not suitable for electrospinning. FYTRONIX designed syringe heater for heating the polymer solution up to 80 degree C, it is a simple way to heat the solution. Only syringe can be heated, while the tubing connected with the syringe can't be heated, so it should be used with Tubeless spinneret together.
XY MOVING STAGE
X-Y moving stage is quite useful for making even fiber film on inflexible materials. It can be used as a holder for glass or ceramic, and other inflexible materials, to make even nanofiber film or nanoparticle film on the surface of the collector.
Many solvents used by electrospinning process can disslove many plastic tubing and connectors. FYTRONIX designed and made special PTFE tubing for electrospinning which can be used for almost all solvents used for electrospinning process.
Humidity & Temperature Monitor
RH monitor is a cost effective solution to monitor the temperature and relative humidity of glove box inside. It can set up an alarm based on requirement, and show instant humidity and temperature.
Halogen lamp heater with thermal couple and digital temperature controller are integrated into the fume hood for environmental heating up to 40 ºC
The unit has been designed to work in a laboratory and research environment, having and excellent flexibility, ease of use and minimum setup time and maintenance. The working area is 650mmx400mmx645mm. The transparent enclosure allows the visualization of the process and an easy access to the cabinet
SOME DETAILS ABOUT NEEDLE TIPS
Syringe Needle Tips